Share this page

NEX 613

Mini-ITX, Socket LGA1150 4th Generation Intel® Core™ i7/i5/i3 with Q87, 2x DDR3 SO-DIMM, DP/ HDMI/ DVI-I, PCIex16/ mPCIe, 2x GbE/ 4x SATA3.0/ 12x USB/ 6x COM/ mSATA
  • Main Feature
  • 4th Generation Intel® Core™ processor family
  • Intel® Q87 chipset
  • 2x204-pin SO-DIMM support DDR3 1333/1600Mhz up to 16GB system memory
  • Support VGA/ HDMI/ LVDS three displays
  • 2x Intel® GbE, 4x SATA3.0, 1x mSATA, 12x USB3.0/ 2.0, 6x COM, 8x GPIO
  • 1x PCIe x16 (Gen. 3.0), 1x mPCIe
  • Support AT/ ATX mode by ATX Power Input
Add to Inquiry
Datasheet(PDF)
CPU Support Socket LGA1150, 4th generation Intel® Core™ i7/i5/i3/ Pentium®/ Celeron® processors
Main Memory 2x 204-pin SO-DIMM support DDR3 1333/1600Mhz up to 16GB system memory
Chipset Intel® Q87 Platform Controller Hub
BIOS AMI BIOS UEFI Plug and play support
On-board LAN 1x Intel® I217LM PHY for AMT 9.0 1x Intel® I210 PCI Express Gigabit Ethernet Support boot from LAN (PXE) 2x RJ45 with LEDs
Display 4th generation Intel® Core™ socket LGA1150 processors Integrated HD 4600 graphics engine 1x HDMI 1x VGA 1x LVDS : dual (24-bit) LVDS panel, resolution up to 1920 x 1200 by 40-pin connector
Expansion 1x PCIex16 (Gen. 3.0) 1x mPCIe
I/O Interface Serial port : 6 ports
COM1/2/3 : RS232/422/485 with DB9 male connector on edge I/O
COM4/5/6 : RS232 2x 5/ 2.54mm box header USB 2.0/ 3.0 : 12 ports
4x USB 3.0 ports by edge connectors
8x USB 2.0 ports by 2x 5-pin header pitch 2.54mm GPIO : Support 4 x GPI and 4 x GPO with TTL level (0/5V) Onboard Power LED and HDD Active LED Pin Header 1x 4-pin fan connector (for CPU) 1x 4-pin fan connector (for System) 1x 18-pin header for TPM 1 x Keyboard/ Mouse pin header Onboard Buzzer/ SMBus2.0/ reset SW/ On &Off switch button
Edge I/O Interfaces 1x VGA + HDMI 2x stack DB9 connector for COM1 & COM2 1x DB9 male connector for COM3 + DVI-I connector 2x RJ45 with dual stack USB 3.0 (blue) Line-out/ MIC-in phone jack
Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)
Storage 4x SATA3.0 ports with RAID 0,1,5,10 function
System Monitor Monitoring of 4 voltages and 2 temperatures and 2 fan speed detection 4 voltages (Vcore, +12V, +3.3V, 5V) 2 temperatures (CPU, System) 2 fan speed detection
On-board RTC On-chip RTC with battery backup 1x External Li-Ion battery
Power Input Support AT and ATX mode
Power Requirements Power requirement: ATX Input, jumper AT/ ATX (default) mode Onboard 2x 12-pins standard ATX version 2.0 power connector
Dimensions Mini-ITX M/B form factor 170mm (L) x 170mm (W)
Environment Operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: operating 10% to 90%, non-condensing
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!