PEAK 777VL2

Intel® 45nm/65nm Core™ 2 Quad/Duo LGA775 with 2 x PCI Express Gigabit LAN/SATA/VGA/USB2.0
  • Main Feature
  • Single Socket LGA775, Support Intel® 45nm/ 65nm Core™ 2 Duo/ Core™ 2 Quad with 800/ 1066/ 1333 MHz FSB
  • Intel® G41 and ICH7/ ICH7R
  • 2 x DIMM, Support DDR3 Memory up to 4GB
  • 2 x Intel® 82574L PCI Express Gigabit Ethernet LANs
  • 4 x SATA, 8 x USB 2.0, 2 x COM Ports
Add to Inquiry
Datasheet(PDF)
CPU Support Supports Intel® LGA775 Core™ 2 Quad/ Core™ 2 Duo/ Celeron® processors Intel® Embedded Processors List (Intel® Longevity CPU)
Intel® Core™ 2 Quad Processor Q9400
Intel® Core™ 2 Duo Processor E8400 & E7400 & E1500
Intel® Celeron® 440 Processor
800/1066/1333 MHz System Bus
Main Memory 2 x DIMM, support Dual channel SDRAM DDR3 memory up to 4GB, FSB 1066/800MHz * Note: Maximum 4GB. Actual memory size is dynamic based on the OS I/O resource allocation
Chipset Intel® G41 Graphics Memory Controller Hub (GMCH) Intel® ICH7/ICH7R I/O Controller Hub
BIOS Award System BIOS Plug & Play support 8M-bit flash ROM
On-board LAN 2 x Intel® 82574L PCI Express Gigabit Ethernet LAN 2 x RJ45 with LED Supports Boot From LAN (PXE) Supports Wake on LAN (When 5Vsb power available, LAN1 & LAN2)
Display Intel® G41 GMCH Integrated CRT: 1 x DB15 VGA connector
I/O Interface USB 2.0: 6 ports, through 1x6 JST Serial port: 2 ports, with 2x5 box header (2.0mm), supports RS232 only Parallel port: 1 port, with 2x13 box-header (2.0mm) PS2: 1 x 6-pin JST connector (2.0mm) for KB/Mouse Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH 2-pin header for SMB; 2-pin header for reset; 2-pin header for power on switch 2-pin header for power LED; 2-pin header for HDD LED I/O on bracket
1 x DB15 VGA connector
2 x RJ45 GbE port
1 x PS2
1 x IDE with 40-pin header
1 x Floppy with 34-pin header
Storage SATA: 4 ports
Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds Tolerance 15% under room temperature 25°C
On-board RTC On-chip RTC with battery backup 1 x External Li Battery Torrance less than 2sec (24 hours) under 25°C
ISA Support Through PCI to ISA Interface (ITE 8888) No ISA Master Devices but ISA DMA Devices Maximize ISA Slot support up to 3
System Monitor 5 voltage (For +1.1V, +1.5V, +3.3V, +5V, +12V, Vcore) 3 Temperatures (CPU, two external Temperature Sensor) 2 FANs speed ( For CPU and System)
Power Input Power source from backplane through PCI/ISA Golden Finger Supports both AT or ATX Power Supplies (Automatically, BIOS default: AT Mode) When change to ATX, the BIOS default setting is as follow: POWER -SUPPLY TYPE--> [ATX]; AUTO PWR-FAILURE RESUME -->[ON] +3.3V is Converted from +5V and not directly from Backplane or Power Supply +5Vsb (Standby power) is connected from Backplane through 3pins Connectors 4 Pins +12V Power Input Connector
Dimensions 338.58mm (L) x 122mm (W) (13.3" x 4.8")
Environment Board level operating temperature: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: 10% to 90% (Non-condensing)
Non-operating 5% to 95%, non-condensing
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!